The Rings Trail at Hole in the Wall at Mojave National Preserve. (CA) gets it’s name because the only way to get out of the Hole in the Wall courtyard area is up some steep rock faces. To help make this possible, metal spikes with rings on the end have been hammered into the rocks:
When you first see the rings, you will be tempted to try and place your feet into the ring to help you up. This doesn’t work very well as I can attest from first hand experience. Instead, you will have much more success climbing using the rings for your hands and the straight spike area for your feet. Otherwise you will find that your feet are twisting in all different directions as your try to climb as mine were. The same technique can be used for climbing down the rings:
The rings area isn’t too difficult although it could be a challenge for small children. The gaps are narrow enough that you can also use the rock walls for support as you climb or descend.
The Rings Trail loop at Hole in the Wall in Mojave National Preserve (CA) begins at the far end of the visitor center parking area. About a quarter mile into the hike, you will see a large boulder next to the trail which has a number of petroglyphs on it:
I always get confused what to call these when I see them (petroglyphs or pictograms), so I had to finally took the time to figure out the difference between the two. Petroglyphs (often times referred to as rock engravings) are created by removing part of a rock surface to make the picture or symbol. Pictographs are images drawn or painted on a rock face rather than engraved into it.
While the petroglyphs at Hole in the Wall aren’t the best examples to see at National Parks (they are fully accessible and it appears that people have touched them over the years), they are still worth stopping for and admiring on your hike.
One place that I would definitely recommend when visiting Mojave National Preserve (CA) is Hole-in-the-Wall which is perfectly named. A few million years ago, the eruptions of a nearby volcano covered the area with a mixture of lava, gas and ash. As the ash cooled and the gas began to dissipate, the gas bubbles within the cooling lava expanded forming large holes. These large holes in the lava, which have been further enlarged through natural wind and water erosion, give the site its appropriate name.
The best place to begin your exploration of this area is at the visitors center where you can learn about the 1.5-mile loop Hole-in-the-Wall Rings Trail, nearby camping, nearby picnic areas and other activities in the area. The visitors center has running water and bathrooms and the park rangers were extremely helpful. Best of all, there are no fees to explore Hole-in-the-Wall.
If you do nothing else, you will definitely want to take the Hole-in-the-Wall Rings Trail. The Rings Trail trail-head is at the far end of the visitor center parking lot. While you can also begin the loop trail near the camping area, I would recommend doing in this direction to leave the best for last. This will lead you first through the desert shrubland to a rock with petroglyphs, then around the back side where you will get a wondrous view of the lava rocks that give the site its name which you will ultimately climb through with the help of metal rings drilled in the rock to make it possible to get through. You will emerge at the camping site and then it is a short walk from there down the main road back to the visitors center. definitely worth doing to see the interesting rock formations and you will want to give yourself some extra time to explore all the nooks and crannies that make the area so interesting.